Beste beheerder , als ik aan het invoeren ben en een zegel tegenkom die ik niet in mijn verzameling heb kan ik heel simpel naar een aanbieder gaan en in mijn winkelmandje doen , maar dan begint het probleem , want als ik weer terug wil naar waar ik gebleven was moet ik wel drie maal terug klikken en wanneer ik dan weer een zegel in mijn verzameling opneem gaat de site steeds weer terug naar de hoofd pagina , dit kan ik alleen oplossen door een pagina vooruit en weer achteruit te bladeren , dus hier moet mischien een keer naar gekeken worden .
Met vriendelijke groeten Thom-postzegel.
Dear administrator, if I am entering and come across a stamp that I do not have in my collection, I can very simply go to a provider and put it in my shopping cart, but then the problem starts, because if I want to go back to where I left off I have to click back three times and when I add another stamp to my collection the site keeps going back to the main page, I can only solve this by scrolling backwards and forwards one page, so here may need to be looked at once.
Best Regards Thom Stamp.
- Catalogue administrator
- 70 messages
- December 26, 2020 12:33
Beste Thom-postzegel,
Je kunt ook een tweede LastDodo scherm openen,
dat werkt een stuk makkelijker.
Vr. groet ,Phoving.
Dear Thom Stamp,
You can also open a second LastDodo window,
that works a lot easier.
Fr. Regards, Phoving.
Dit is natuurlijk ook een oplossing , maar als jullie toch met verbeteringen bezig zijn was mijn opmeking een sugestie om het gebruik nog iets vriendelijker te maken.
This is of course also a solution, but if you are working on improvements, my suggestion was to make the use even more friendly.
- Catalogue administrator
- 70 messages
- December 26, 2020 12:46
Suggesties zijn altijd welkom, maar wilde voor nu een oplossing aandragen.
Suggestions are always welcome, but wanted to come up with a solution for now.
- Catalogue administrator
- 4,041 messages
- December 26, 2020 17:27
Patrick,
Een tweede scherm (tabblad) openen is niet zonder gevaar heb ik al meermaals ondervonden. Er is ergens 'iets' op LD dat je in de gaten houdt (nodig voor de sturing, om na een actie terug te keren naar je vertrekpunt), waardoor je in een tweede scherm de kans loopt op een heel andere plaats uit te komen dan verwacht als je bv. je selectie van-tot aanpast en op 'Toepassen' klikt. De sturing geraakt ergens in de war. Meestal kom ik dan in het hoofdscherm van LD terecht.
Wat je zeker niet moet doen is meerdere tabbladen openen om meerdere items 'in serie' toe te voegen. Is wel gemakkelijk voor de titel en serienaam: cut en paste-paste-paste. Maar ... bij opslaan loopt het helemaal fout en dan mag je herbeginnen. Het enige wat je dan kan doen is oefenen in krachttermen.
Patrick,
Opening a second screen (tab) is not without danger I have encountered several times. There is 'something' somewhere on LD that you are watching (necessary for control, to return to your starting point after an action), so that you run the risk of ending up in a completely different place in a second screen. expected when you eg adjust your selection from-to and click on 'Apply'. The steering gets confused somewhere. Usually I end up in the main screen of LD.
What you should definitely not do is open multiple tabs to add multiple items 'in series'. Is easy for the title and series name: cut and paste-paste-paste. But ... when saving it goes completely wrong and you can start over. The only thing you can do is practice expletive terms.
- Catalogue administrator
- 4,041 messages
- December 26, 2020 17:43
Thomas,
Volgens mij heb ik af en toe hetzelfde voor, maar niet altijd. Een raar fenomeen.
Bij toevoegen 'in verzameling' of 'in zoeklijst gebeurt het at random hier veelvuldig dat ik op de hoofdpagina terecht kom. Misschien heeft het ergens iets met instellingen te maken ... op mijne PC ben ik nogal strikt. Bv. standaard geen coockies accepteren tenzij ik die zelf expliciet toe sta voor een welbepaalde site.
Echter, als achterliggend (tov van de site) gebruik wordt gemaakt van externe legoblokjes (stukjes programma, scripts edm op sites als bv. vars.hotjar.com) en die vereisen toegang tot je pc, om d.m.v. van coockies je te volgen en te sturen ...dan zie je die niet in de lijst van goed te keuren sites en is er een probleem. Ik vermoed dat er zoiets 'achterliggends' actief moet zijn op LD. Meestal is het goed dat onbekende sites geen toegang krijgen (veiliger surfen), maar soms heeft het gevolgen.
Thomas,
I think I have the same thing every now and then, but not always. A strange phenomenon.
When adding 'to collection' or 'to search list, it often happens at random that I end up on the main page. Maybe it has something to do with settings somewhere ... on my PC I'm pretty strict. Eg. do not accept cookies by default unless I explicitly allow them myself for a specific site.
However, if underlying (compared to the site) external Lego blocks (pieces of program, scripts, etc. on sites such as vars.hotjar.com) are used and they require access to your pc, in order to use it. of coockies to follow and send you ... then you will not see them in the list of sites to be approved and there is a problem. I suspect there must be something like this 'behind' active on LD. It is usually good that unknown sites are not allowed access (safer surfing), but sometimes it has consequences.
In de oude versie van de catalogus had je bij de indeling op jaar alle zegels frankeer, Port, velletjes e.v. allemaal op je scherm. Zowel in de algemene catalogus als die van jezelf. Dat was zeer overzichtelijk. Hiermee voorkom je ook het onbewust inbrengen van doublures en verbeter je de toegankelijkheid van alles wat in de catalogus staat. Graag een beoordeling hiervan t.b.v. een aanpassing.
paulgerdje
In the old version of the catalog, you had all stamps, franking, postage, sheets and so on, all on your screen in the year-by-year format. Both in the general catalog and your own. That was very clear. This also prevents the unconscious insertion of duplicates and improves the accessibility of everything in the catalog. Please assess this for an adjustment.
paulgerdje
- Catalogue administrator
- 4,041 messages
- January 06, 2021 18:32
Hallo Paulgerdje,
Daar sluit ik mij bij aan. Alleen, er zullen indertijd wel verhitte discussies geweest zijn voor het bapalen van 'Standaard'
Maar blokken ... 75% zit bij velletjes, en die wil ik er wel niet bij zien. Voor veel landen zou dit bijna hetzelfde worden als 'Alles'.
Hello Paulgerdje,
I agree with that. Only, there must have been heated discussions at the time for baping 'Standard'
But blocks ... 75% is in sheets, and I don't want to see them. For many countries this would become almost the same as 'Everything'.
- Catalogue administrator
- 4,041 messages
- January 06, 2021 18:35
Maar port ... die zouden er bij mogen (in 'Standaard'). Nu moet ik bij ieder jaar van ieder land bijna klikken op 'alles' om die éne portzegel te zoeken. Erg is het als je daarna terugschakelt naar 'Standaard' dat alle andere selecties overboord gaan.
But port ... they should be included (in 'Standard'). Now I almost have to click on 'everything' for every year in every country to look for that one postage stamp. It is a bad thing if you then switch back to 'Standard' that all other selections will be discarded.
- Catalogue manager
- 5,347 messages
- January 06, 2021 19:08
@Paulgerdje
Bij mijn weten stond de filter Standaard / Alles ook in de oude versie. Alleen was het toen de groene balk die deze filter aangaf. Maar werkte net als de huidige Standaard / Alles filter.
@Paulgerdje
To my knowledge, the Standard / Everything filter was also in the old version. Only then it was the green bar that indicated this filter. But worked just like the current Standard / All filter.
- 2,571 messages
- February 12, 2021 17:35
Beste Tammo, kunnen de gegevens (jaartal + waarde die onder de afbeelding staan in de catalogus in een zichtbare kleur moeten worden ingesteld in Rood of zwart of blauw.
dit licht grijsblauwe is slecht te zien.
eveneens als ik een bestelling krijg, zijn de opmerking die ik plaatste in byzonderheden onder een afbeelding zoals (met gom en nette plakker) of een ander opmerking, totaal niet is te lezen, hier wordt ook die lichte kleur gebruikt.
ik vind dat alles wat je moet lezen ook duidelijk leesbaar moet zijn.
Dear Tammo, can the data (year + value) that appear below the image in the catalog in a visible color should be set in Red or Black or Blue.
this light grey-blue is difficult to see.
also when I get an order, the comment I placed in details under an image such as (with eraser and neat sticker) or another comment, is completely impossible to read, here that light color is also used.
I believe that everything you need to read should also be clearly legible.
- Catalogue manager
- 5,347 messages
- February 12, 2021 18:03
@aartinge
Qua vormgeving e.d. ligt alles nu vast, maar ik zal dit eens voorleggen.
Je bedoelt de opmerkingen die je kunt plaatsen in het veld Notities als je een item te koop aanbied of toch een ander veld?
@aartinge
In terms of design, etc., everything is now fixed, but I will present this once.
You mean the comments you can post in the Notes field when you list an item for sale or any other field?
- Catalogue administrator
- 4,041 messages
- February 12, 2021 18:25
@Collectioneur
werkte net als de huidige Standaard / Alles filter.
Tammo,
In de 'oude' interface had ik niet gevonden hoe je terug naar 'Standaard' kon schakelen eenmaal je op 'Alles' had geklikt. Maar ik ben pas eind oktober op LD er bij gekomen, dus de zoektijd was niet zo ruim. Ik weet dan ook niet of de filters (selecties) dan wel of niet behouden bleven.
In de nieuwe interface is het heel heel duidelijk. 2 schakelknoppen die er altijd staan (op een vaste plaats). Een houvast.
Alleen, van 'Alles' terugschakelen naar 'Standaard' is het zelfde als 'Verwijder alle filters'. Het is niet echt schakelen. Van 'Standaard' kun je altijd ongestraft naar 'Alles' (bv. periode VAN-TOT blijft netjes behouden). Omgekeerd niet. Dan ben je terug bij af. Als gebruiker moet je dan opnieuw alle filters instellen en telkens opnieuw de machine laten werken om die filter te doen toepassen ... Zonde van de 'processing time'.
@aartinge
Aart,
in Rood of zwart of blauw
Dat lichtgrijs is idd niet duidelijk genoeg. De nominale waarde is regelmatig belangrijk om te lezen, maar ik moet mijn ogen tot het uiterste inspannen om het te kunnen lezen.
Rood zou ik niet aanraden. Dat schreeuwt te veel en duidt meer op een fout. Donkerblauw vind ik persoonlijk de beste optie.
Volgens mij zou blauw ook mooier passen op die plaats: onder de blauwe pictogrammen ('te koop', 'gezocht', 'in verzameling') met de titel in het zwart er tussen als aandachttrekker. Lijkt mij esthetisch ok?
PS voor Tammo,
Vandaag mijn oude tablet bovengehaald en eens LD er op geprobeerd ... dat doe ik nooit meer. Nu weet ik weer waarom ik die tablet, ooit gekocht in een enthousiaste fase, ongebruikt laat liggen. Het enige wat op die tablet werkt van LD is 'terug naar de hoofd pagina' zoals gemeld in de aanvang van dit draadje.
Misschien volgt er nog wel eens een Cummunity-bericht van mij hierover :)
@Collectioneur
worked just like the current Standard / All filter.
Tammo,
In the 'old' interface I had not found how to switch back to 'Standard' once you clicked 'All'. But I only joined LD at the end of October, so the search time was not that long. I don't know whether the filters (selections) were preserved or not.
It's very clear in the new interface. 2 switch buttons that are always there (in a fixed place). A handhold.
Only, switching back from 'All' to 'Standard' is the same as 'Clear all filters'. It is not really shifting. From 'Standard' you can always go with impunity to 'Everything' (eg period FROM-TO is neatly preserved). Not the other way around. Then you are back to square one. As a user, you have to set all filters again and keep the machine running again to have that filter applied ... Sin of the 'processing time'.
@aartinge
Aart,
in Red or black or blue
That light gray is not clear enough idd. The face value is regularly important to read, but I have to strain my eyes to read it.
I would not recommend red. That screams too much and indicates more of an error. I personally think dark blue is the best option.
I think blue would also fit better in that place: under the blue pictograms ('for sale', 'wanted', 'in collection') with the title in black in between as an attention grabber. Seems okay aesthetically?
PS for Tammo,
Today took out my old tablet and tried LD on it ... I'll never do that again. Now I remember why I leave that tablet, once bought in an enthusiastic phase, unused. The only thing that works on that tablet from LD is 'back to the main page' as mentioned in the beginning of this thread.
Maybe a Cummunity message from me about this will follow :)
- Catalogue manager
- 5,347 messages
- February 12, 2021 18:43
Alleen, van 'Alles' terugschakelen naar 'Standaard' is het zelfde als 'Verwijder alle filters'. Het is niet echt schakelen. Van 'Standaard' kun je altijd ongestraft naar 'Alles' (bv. periode VAN-TOT blijft netjes behouden). Omgekeerd niet. Dan ben je terug bij af. Als gebruiker moet je dan opnieuw alle filters instellen en telkens opnieuw de machine laten werken om die filter te doen toepassen ... Zonde van de 'processing time'.
Heb ik doorgegeven.
Only, switching back from 'All' to 'Standard' is the same as 'Clear all filters'. It is not really shifting. From 'Standard' you can always go with impunity to 'Everything' (eg period FROM-TO is neatly preserved). Not the other way around. Then you are back to square one. As a user, you have to set all filters again and keep the machine running again to have that filter applied ... Sin of the 'processing time'.
I passed on.
- 2,571 messages
- February 12, 2021 20:53
ja ik bedoel Notities
yes I mean Notes
- 933 messages
- February 17, 2021 20:50
Zoals het nu is, zie je een verwijzing ernaar pas, als je al begint met invoeren. Éérder kunnen lezen van de instructies lijkt logischer en efficiënter.
As it is now, you won't see a reference to it until you start entering it. Being able to read the instructions earlier seems more logical and efficient.
- Catalogue administrator
- 4,041 messages
- February 18, 2021 07:41
De verwijzing op het scherm 'Nieuw item toevoegen' zou volgens mij mogen behouden blijven als een wijze raad (of herinnering), met de gebruiksvriendelijke link?
Hieronder enkel een probeersel (zien of een grafisch odject plaatsen ook bij mij lukt, en hoeveel plaats dit inneemt). Ik botste per toeval op deze wenskaart en vond 'm wel wat charme uitstralen.
Misschien moet achterliggend, indien mogelijk, getest worden op de afmetingen van een in te voegen grafisch object om excessen te voorkomen ...
I think the reference on the 'Add New Item' screen should be kept as a wise advice (or reminder), with the easy-to-use link?
Below is just a try (to see if placing a graphical object also works for me, and how much space this takes up). I accidentally bumped into this greeting card and thought it exuded some charm.
Perhaps the underlying, if possible, should be tested for the dimensions of a graphic object to be inserted to avoid excesses ...
- LastDodo Team
- 6,271 messages
- February 18, 2021 10:24
En nee, deze laatste dodo zal altijd blijven leven. Beloofd!
And no, this last dodo will always live. Promise!
Paulgerdje.
Paulgerdje.
- Catalogue administrator
- 176 messages
- April 13, 2021 21:10
staat ook al een aantal dagen op hetzelfde aantal
has also been on the same number for a number of days
- Catalogue manager
- 5,347 messages
- April 13, 2021 21:24
staat ook al een aantal dagen op hetzelfde aantal
De telmachines waren uitgeleend aan de overheid, we wachten met smart op de terugkomst:-)
Het is gemeld.
has also been on the same numberfor several days
The counting machines were on loan to the government, we are eagerly awaiting the return :-)
It has been reported.
- Catalogue manager
- 5,347 messages
- April 15, 2021 21:00
marcopolo15580
zijn er probleem mee site iets wil combineren fakturen luk nie
Ik gok dat je vraagt of er misschien problemen zijn met de site, omdat jij geen facturen kunt combineren.
Met facturen combineren bedoel je waarschijnlijk het combineren van bestellingen. Dat kan problemen opleveren indien er zeer veel (honderden) items bij betrokken zijn.
marcopolo15580
Are there any problems with the site that wants to combine something? Invoices?
I'm guessing you are asking if there might be problems with the site because you can't combine invoices.
By combining invoices you probably mean combining orders. This can cause problems if very many (hundreds) of items are involved.